TV mounting over a fireplace or on brick: what to know before you book

Masonry anchors, heat, viewing height, mount types and cable concealment: what Taskify technicians check before mounting a TV above a fireplace or on brick or stone.

Mounting a TV on drywall into studs is a routine job. Mounting one above a fireplace, or on brick or stone, is the same job with four extra decisions. Taskify technicians have done both, including TVs and soundbars above stone fireplaces, and these are the things the team checks during quote review.

1. The surface decides the anchors

Drywall over wood studs takes lag bolts into the studs. Brick, stone veneer and concrete do not. They need masonry anchors (sleeve or wedge anchors, or heavy-duty concrete screws) drilled with a hammer drill, and on brick the technician places anchors in the brick itself rather than the mortar joints wherever the mount's bolt pattern allows it.

Stone veneer is the trickiest case: the stones are irregular and sometimes hollow behind, so the technician probes the spots before drilling. This is why we ask for a photo of the surface with your quote request. The photo tells us what hardware to bring and how long the job will take.

2. Heat from the fireplace

If the fireplace is used, the wall above it gets warm. Two practical checks:

  • Run the fireplace for half an hour and feel the wall where the TV will sit. If it is uncomfortably warm to the touch, the TV will not like it either.
  • A mantel or a deep shelf between the firebox and the TV deflects a lot of rising heat. Many fireplaces with a TV above them rely on this.

Taskify does not alter fireplaces or run new gas or electrical lines. If the wall is too hot, the answer is a different wall or a pull-down mount that stores the screen higher, not a modification to the fireplace.

3. Viewing height and the mount type

A TV above a fireplace is almost always higher than ideal. The usual fix is the mount, not the position:

  • Tilting mount. Angles the screen down a few degrees so you are not looking at a reflection. The minimum we recommend above a fireplace.
  • Full-motion mount. Pulls the screen out and swivels it. Heavier, and it needs solid anchors, which brings you back to point 1.
  • Pull-down mount. Lowers the screen to eye level when in use. The most comfortable option and the most expensive.

Tell us the TV size and whether you already have a mount. The quote changes if we supply one.

4. Cables

On drywall, cables can usually be concealed with an on-wall channel; it appears in our completed projects. On brick or stone, an on-wall channel is still possible but it is visible against the texture, and in-wall routing through masonry is usually not practical. The honest answer is often a paintable raceway that follows a mortar line, or a power bridge installed by a licensed electrician before we mount.

Real jobs

  • Valerie S. had an 85-inch TV mounted and the speakers connected: "awesome work and super friendly, did and amazing job setting up my 85' tv and also helped us connect our speaker."
  • Ivan A. had a 75-inch LG mounted on a tilt mount on drywall: "I had my TV mounted and they did a fantastic job, very quick and professional."
  • Jevanda L. combined two TV mounts with two curtain rods in one visit: "Taskify provided a window and updated the morning of my appointment with a specific time. Oscar arrived on time and was kind and considerate."

Pricing

TV mounting is quoted per job from your photos. Taskify's minimum service charge is $89; the fixed quote reflects the TV size, the surface and whether a mount is supplied. You pay after the work is completed, and the job carries a 60-day workmanship warranty.

Send the wall photo and TV size through the quote form, or read the local page for your market: Dallas–Fort Worth, Metro Atlanta, Stamford, CT, Houston or the Bay Area and Fresno.

More guides

Ready to book this job?

Send photos and a description. A fixed quote comes back after review; you pay only after the work is completed.

Request a free quote